• 9311002620
  • support@htsindia.com


Reviews -  (6 reviews)

HVAC is important in the design of medium to large industrial and office buildings such as skyscrapers and in marine environments such as aquariums, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors.

Main Components are:

  • Basic Components of Air-Conditioning and Refrigeration machines.
  • Categories of Air Conditioning.
  • Study of Psychometric Charts.
  • Load Calculation.
  • Air Distribution System.
  • Static Pressure Calculation.
  • Hydraulic System.
    1. Introduction
  • Fundamentals
  • Modes of Heat Transfer
  • Sensible Heat and Latent Heat
    2. Basic Components of Air-Conditioning and Refrigeration machines
  • Basic Refrigeration System or Vapor Compression Cycle
  • Pressure – Enthalpy Chart
  • Function & Types of Compressor
  • Function & Types of Condenser
  • Function & Types of Expansion Valve
  • Function & Types of Evaporator
  • Accessories used in the System
  • Refrigerant and Brines
    3. Classification of Air-Conditioning System
  • Window A/C
    4. Working of Window A/C with Line Diagrams
  • Split A/C
  • Types of Split A/C
    5. Working of Split A/C with Line Diagrams
  • Duct able Split A/C
    6. Working of Duct able Split A/C with Line Diagrams
  • Variable Refrigerant Volume (VRV)/ Variable Refrigerant Flow (VRF)
  • Duct able Package A/C
  • Working of Duct able Package A/C with Line Diagrams
    7. Categories of Air Conditioning
  • All air system
  • All water system
  • Air - water system
  • Direct Refrigerant system
    8. Study of Psychometric Charts
  • Dry Bulb Temperature
  • Wet Bulb Temperature
  • Dew Point Temperature
  • Relative Humidity
  • Humidity Ratio
    9. Processes
  • Heating
  • Cooling
  • Cooling and Dehumidification
  • Heating and Humidification
  • Finding Values Using the Chart
  • Load Calculation
  • Survey of Building
  • Cooling Load Steps
    10. Finding Temperature difference (?T)
  • Wall
  • Glass
  • Roof
  • Partition
    11. Finding ‘U’ Factor
  • Wall
  • Glass
  • Roof
  • Partition
    12. Finding Ventilation requirement for IAQ Load Calculations (Manually using E-20 form) ESHF, ADP & Air Flow Rate (CFM) Calculation Air Distribution System
  • Duct-Definition & Terminology
  • Duct Design consideration
  • Duct sizing methods
  • Duct sizing as per Aspect Ratio
  • Finding Duct size using Ductulator
  • Calculation of Number of sheets for Duct
  • Gauge selection for Sheet Metal
  • Bill of Materials for Duct Network
  • Legends and Symbols used in the HVAC Industry
  • Selection of Diffusers and Grilles
  • Duct Materials and Insulation materials used in HVAC Industry
  • Duct Routing - Preparation of single line diagram (SLD)
  • Preparation of Layouts (Double line Diagram - DLD) as per SMACNA rules
  • Openings for Ducts passing through Wall Duct supports
  • Concept of CAV & VAV
    13. Static Pressure Calculation
  • Selection of Motor HP
  • Selection Fan/Blower RPM
    14. Hydraulic System
  • Classification of Water Piping
  • Pipe sizing for chill water system
  • Fittings used in the HVAC Piping System
  • Valves used in the HVAC Piping System
  • Function of Valves
  • Openings for CHW Pipes passing through Wall
  • Pipe supports
  • Training Curriculum as per Industrial Standard.
  • Placement Assistance.
  • Pre Placement & Technical Assessment at frequent interval.
  • Real time case studies/Project Based Training.

What if I have queries after I complete this course HVAC ?

You can access to the Support as per the validity mentioned in your I-card issued by High Technologies Solutions, the team will help you in resolving queries, during and after the course.

How soon after admission would I get classes ?

Post-enrollment, the HTS representative will be instantly provided to you and will be available till end of the course and assist you with the date & time for classes.

Do you provide placement assistance ?

Yes, High Technologies Solutions is committed to provide you a great learning experience. We will train you accordingly so that you will grab job offers by presenting your skills at the time of an interview. We can assist you on resume building and also share important interview questions once you are done with the training.

I have recently enrolled but I am unable to continue in the same batch. Can I reschedule it to a future date ?

Yes, it is possible. You can enroll now and can reschedule your classes in Future. You have complete Flexibility on this at High Technologies Solutions. Also, you can check out the website to know more about our future batches.

Can I attend a demo session ?

Yes, it would give you a clear insight about how are the classes conducted, quality of trainer and the course quality.

Are these training sessions conducted online or via Physical classroom ?

These classes will be completely Physical classroom. You can discuss your queries with trainer during a class.

What is the schedule of the classes and how many hours effort would I need to put in every week ?

Depending on the batch you select, Your Classes will be held either every weekend for 4 weeks or 3 weekdays. This shall comprise hands-on assignments.

What are the payment options ?

You can pay by Cash, Cheque, Credit Card, Debit Card or Net Banking from all the leading banks. We use a CC Avenue Payment Gateway.

Who are the Instructors ?

All our instructors are real time professional from the Industry and have at least 8 to 10 yrs. of relevant experience. They are experts and worked part time at High Technologies Solutions for providing training so that students get a great learning experience.

How will I execute the Practical’s ?

For your practical work, High Technologies Solutions provides you step-by-step procedure guide. Additionally, our expert support team will be available to assist you.

What if I miss a class ?

You will never lose any class. You can choose either of the two options: 1. You can attend the missed session, in any other batch. 2. Otherwise trainer will arrange the backup classes for the same.

What if I have more queries ?

You can give us a CALL at 92-11-144222 OR email at support@htsindia.com

Yes, I am interested in this Course !! Schedule a Demo Register Now

Courses Review


Could have finish fast. - SHRINIVAS SAPKAL / Mumbai Andheri(E) (M -04142)


good - DEEPAK SINGH / Noida (N-06924)


Great Training - MOHSIN SIDDIQUI / Mumbai Andheri(E) (M -04252)


the institue delivers what it says - ROHIT GANGULY / Mumbai Andheri(E) (M -04155)




It's a great place for Revit MEP training. Fantastic Trainer, very friendly and encouraging. All of the exercises were on a scale of good to excellent. I would recommend this course to a friend or colleague because it presents a very interesting, fun and colorful way of bringing training/workshops to people” “Thank you for delivering a fantastic course. The content was great and very relevant to me both personally and professionally. I will definitely be putting this into practice “Martin was - CHANDRA PAL SINGH / Kalkaji (K-08350)

Disclaimer: We only take Corporate & College Training in this course & No retail training is provided in any of the center.

Quick Enquiry

If you have interested any of above course which we provide, So send us a mail we will reply you soon !!